Anti Fog Film for Motorcycle Helmet Visors

Our Hydrosorb anti-fog technology can provide you with a clear vision solution when riding, as heavy humidity often fogs the helmet visors inside, especially in winter. The anti-fog visor is made of high-definition and high-transmittance optical material, ensuring an undistorted, high-definition vision.

The highly transparent optical adhesive is waterproof, sweat-proof, and UV-resistant, with excellent adhesion to ensure the durability of the product. When a replacement is needed, the insert film can be removed without leaving any residue, preventing damage to the helmet lens.

To use the anti-fog visor insert, first, clean the helmet visor with a soft fabric, ensuring it is clean and dry. Then, remove the Positioning Mask with the red tag from the anti-fog visor insert and install it on the outside of your visor to guide the positioning of the insert. Adjust the mask freely until the "+" is at the center of your visor.

Next, remove the visor from the helmet and turn its inside upwards. Flex the insert, then align the "+" on the insert with the "+" on the Positioning Mask. Use a finger with a soft fabric to press the glue around for the best adhesion.

It is important to ensure a dust-free environment and thoroughly remove any fingerprints or smudges before fitting the insert film. The anti-fog visor needs to be positioned slightly lower, as you may be looking through the lower edge of the shield to the center.

Repeated removal of the insert after pasting is not recommended, and it is advised to let the insert sit for half an hour or so after application.

This motorcycle helmet lens film uses high-quality materials to achieve more fog resistance and abrasion resistance, as well as better optical clarity with lower distortion. The anti-fog coating on the helmet visor shield will prevent blurring on rainy or foggy days, ensuring clear sight and driving safety.

The anti-fog film visor is easy to operate and paste, requiring no pins or special tools. Simply remove the protective film and adhere the insert to your helmet visor, following the provided instructions or video.

The insert film can be removed without leaving any residue when you want to replace it with a new one. The universal size of 3.58" x 10.7" is compatible with most standard motorcycle helmet visors/shields. Please check the size of your shield before making a purchase.

product information: